Skip to content
HaulTerminal

Intermodal load boards: where carriers find container and drayage loads

By , Truck dispatcher / Updated October 2026

Intermodal load boards are where a trucker finds the road leg of a container move: from a rail ramp or port to a warehouse, and back. The freight looks different from van freight. You pull a container on a chassis, the run is usually short, and the paperwork includes an interchange at the gate. That changes where the loads are posted and who will let you book them. Here is where intermodal freight shows up, what each source asks of you, and how to tell a good container load from a bad one.

Intermodal freight load boards and other sources

SourceWhat it postsHow you get in
Open load boards (DAT One and others)Container loads mixed in with all freightMonthly subscription; filter by container equipment
Shipper programs (Amazon Relay)Power only container moves from rail ramps and portsCarrier approval; book in the program's portal or app
Drayage apps (DrayNow, Cargomatic)Rail and port drayage movesCarrier approval; book and document in the app
Drayage companies and IMCsSteady container work in a marketCarrier agreement, sometimes a lease-on
Freight brokers with drayage desksSpot container movesBroker setup packet

An IMC (intermodal marketing company) buys rail capacity and resells door-to-door intermodal service; it needs local trucks for both ends. A lot of the steady work in any market comes from these companies and from drayage carriers that need extra trucks.

Intermodal container load board filters on open boards

DAT One lists equipment codes for Container (C), Container Insulated (CI) and Container Refrigerated (CR), and you can search several codes at once. DAT One carrier plans started at $59 a month as listed in October 2026. Open boards give the widest range of brokers, but container posts are mixed in with everything else, and many need you to already be UIIA-approved and set up with the drayage broker.

If you are weighing a board subscription against a dispatcher, the dispatcher vs load board self-check walks through it. How van freight is found on the same boards is in dry van loads and load boards.

Shipper programs and drayage apps

These platforms post container moves directly and run the booking, tracking and paperwork in their own apps. Facts below are from each company's own pages, checked October 2026:

  • Amazon Relay. Amazon says its intermodal loads are power only, so a carrier needs a driver and a Class 8 truck that meets Relay standards, plus UIIA certification. Domestic drayage moves are 53 ft containers, Amazon's railroad partners provide the chassis, and trips are typically under 3 hours of driving one way. Loads are booked on the Relay load board, through contracts or with Post A Truck.
  • DrayNow. A platform for domestic intermodal drayage to and from rail yards, covering load matching, tracking, paperwork and billing.
  • Cargomatic. Its carrier FAQ asks for valid MC authority (or California authority) and insurance, lists drayage tractors among the trucks it uses, and requires its carrier app for every shipment.

Approval comes first on all of them. Expect to show authority, insurance at the limits they set (the UIIA baseline is in intermodal insurance), UIIA status and a clean safety record.

What you need before booking intermodal loads

INTERMODAL CHECKLIST
Operating authority and insurance
At each platform's limits
UIIA participation
Through IANA
TWIC for marine terminals
$124 new, 5 years (TSA)
Port truck registry
Where the port has one
Truck
Class 8 tractor with fifth wheel
Sources: IANA UIIA; TSA TWIC fee page; Amazon Relay intermodal requirements. Rail ramps need UIIA but not a TWIC; marine terminals usually need both.

Port work adds terminal access on top of the UIIA, for example the registry and RFID tag covered in port truck pass. Rail ramp work usually needs the UIIA and the railroad's own gate rules.

How to judge an intermodal load

A container load is short, so a few unpaid extras can wipe out the margin. Check:

  1. Where the chassis comes from. Supplied at the ramp, or do you pick it up elsewhere and pay a daily rate?
  2. Free time and per diem. How many days you have before the container or chassis owner charges per day.
  3. Empty return. Where the empty goes back, and whether that leg is paid.
  4. Appointment and gate times. A two-hour gate line can turn a good rate into a bad day.
  5. Weight. Heavy containers on a chassis can push axle limits; ask for the weight before you accept.
  6. Street turn. Can the empty from this delivery be reused for an export nearby instead of going back to the ramp?
RAIL RAMPIMPORTERSTREET TURNEXPORTER
EXAMPLE one container, two paid moves, no empty run back to the ramp

Intermodal vs regular truckload boards

On a dry van board, you find a load and then plan the reload. On intermodal work, the next load often depends on the empty you are holding. That is why carriers who do well with containers stick to one or two markets, learn the ramps and terminals, and work with a few steady sources instead of searching a national board every day. For the bigger picture of how containers move by rail and truck, read intermodal trucking, and for port-side work, drayage trucking.

Questions carriers ask

01What is the best intermodal load board?

It depends on whether you run rail ramps or ports, and where. For domestic 53 ft containers near rail yards, drayage apps and shipper programs post the most direct work. For a mix of freight, an open board with container equipment types adds reach. Most carriers use more than one source, plus a few drayage companies they haul for.

02Are there free intermodal load boards?

Shipper programs and drayage apps generally do not sell a board subscription; you apply as a carrier and book in their app. Open boards like DAT One charge a monthly fee, from $59 a month as listed in October 2026. Check each platform's carrier terms for fees taken from the load pay.

03Do I need UIIA for intermodal loads?

Almost always. The UIIA is the interchange agreement that lets a motor carrier take containers and chassis from railroads, ocean carriers and chassis providers. Amazon Relay says its intermodal work requires it, and most ramps and terminals will not release equipment without it.

04Can I haul intermodal containers with a sleeper truck?

Yes. Any Class 8 tractor with a fifth wheel can pull a container on a chassis. Day cabs are common in drayage because the runs are short and the driver goes home nightly, but a sleeper works, it just carries extra weight and cost for local work.

SOURCES

SOURCE: Primary sources listed above, checked on the dates shown.

More boxes per day, fewer empty miles

We plan container moves around ramp hours and street turns so the next box is lined up before the last one delivers. You sign or decline every rate con.