Skip to content
HaulTerminal

Intermodal trucking: the truck legs of a rail move

By , Truck dispatcher / Updated October 2026

Intermodal trucking looks like any short local or regional run, with a container behind the tractor. The difference is the system around it: rail ramps, chassis, interchange contracts and appointment windows. Shippers buy intermodal trucking services; this guide is for the carrier hauling them.

What is intermodal trucking?

The intermodal trucking definition is simple: one container, more than one mode. A truck takes it to a rail ramp, a train hauls it most of the way, and a truck delivers it. Nobody touches the freight between modes, which saves handling and, on long lanes, money. That is the whole intermodal meaning in trucking.

The truck legs have names:

  • First mile: the shipper's dock to the origin ramp.
  • Last mile: the destination ramp to the consignee.
  • Street turn: using an empty container from an import delivery for a nearby export load, so it never goes back to the ramp empty.
  1. TRUCK

    Pick up empty

    Container and chassis at the origin ramp

  2. TRUCK

    Load at shipper

    Live load or a dropped box

  3. TRUCK

    In-gate at ramp

    Container goes on the train

  4. RAIL

    Rail line haul

    The long distance, on the train

  5. TRUCK

    Out-gate and deliver

    Ramp to consignee, then empty back

The equipment: containers and chassis

Domestic intermodal mostly moves in 53 ft containers built for rail double-stack. A truck pulls the container on a chassis, a bare frame with wheels and twist locks. You never own the box, and often not the chassis either. Here are the published specs of one large carrier's 53 ft container:

53 FT DOMESTIC CONTAINER / ONE CARRIER'S PUBLISHED SPECS
Outside
53' × 8'6" × 9'6"
Inside
52'7" × 8'4" × 8'11"
Cubic capacity
3,920 cu ft
Container tare
10,500 lb
Legal max payload43,500 lb
Trailer Bridge equipment table for J.B. Hunt 53 ft containers, checked October 2026.

A 53 ft dry van is wider inside, so pallet counts can differ. Ocean boxes of 20 and 40 ft come off ships and move as port drayage trucking.

How a carrier gets intermodal loads

Intermodal freight rarely shows up on a general load board in a form you can book cold (the boards and apps that do post it are in intermodal load boards). The work comes through a few doors:

DoorWho you deal withWhat they ask for
Lease on to an intermodal carrierA trucking company with ramp contractsYour truck, CDL, clean record; you run under their authority
Contract with an IMCIntermodal marketing company that buys rail and books trucksOwn authority, UIIA, insurance limits
Railroad or large carrier programsBig intermodal carriers that hire owner-operators or carriersTheir onboarding, their equipment rules
Port and ramp drayage companiesLocal drayage firmsTWIC for ports, local knowledge, a day cab

Whatever the door, you will almost always need to be a UIIA participant, the IANA agreement that governs who is responsible for a container or chassis while you have it. Insurance must include trailer interchange coverage at the limits the equipment provider asks for; the full list is in intermodal trucking insurance. The larger names on the carrier side are covered in intermodal trucking companies.

How intermodal pays

Intermodal truck moves usually pay per move, sometimes with a fuel surcharge and accessorials for waiting, chassis days and extra stops. Miles are short, so the math is about turns: how many loaded moves fit in a day. Two numbers decide it:

  1. Time at the ramp gate and at the customer. Ramps are usually faster than marine terminals, but a backed-up ramp can still eat a morning.
  2. The return. If you deliver a container and must haul it back empty, that move had better be priced as two trips.
EXAMPLE DAY / ONE TRUCK AT A RAIL RAMPEXAMPLE
MOVESTATUSHOURS
RAMP TO DC 34 MILOADED3.0
STREET TURN 9 MIEMPTY0.5
PLANT TO RAMP 41 MILOADED3.5
GATE LINEWAIT1.5

In that EXAMPLE, a street turn saved a trip back to the ramp with an empty box. Your real cost per hour is what makes a move worth taking or not. Figure it with the trucking cost per mile calculator, then divide by the hours a move really takes.

Rules that matter on intermodal runs

  • Weight. Federal limits are 80,000 lb gross and 34,000 lb on a tandem, and a container's declared weight is not always right. Ask for the weight, look at the chassis, and scale it if you have doubts.
  • Chassis condition. You are expected to inspect it like any trailer. Lights, tires, brakes and twist locks are your problem once you leave the gate.
  • Hours. Local intermodal drivers often work under the 150 air-mile short-haul exception in 49 CFR 395.1(e)(1); longer regional moves use the normal hours of service.
  • Interchange paperwork. Check the gate receipt for damage before you leave.

Volume and outlook

US railroads moved 11.08 million intermodal containers and trailers in the first 39 weeks of 2026, up 4.2% from 2025, according to the AAR report for the week ending October 3. More in intermodal trucking statistics.

Is intermodal trucking a fit?

It fits carriers who want home time and steady local work, less so those who want long loaded runs. Many start as an intermodal truck driver leased to a company before getting their own authority.

Questions carriers ask

01What does intermodal mean in trucking?

Intermodal means the freight uses more than one mode of transport, usually truck and rail, without being unloaded in between. In trucking, an intermodal load is a container or trailer you pull to or from a rail ramp or port, as one leg of that longer trip.

02Is intermodal trucking the same as drayage?

Close, but not the same. Drayage is the short truck move at either end of a container trip. Intermodal is the whole door-to-door trip using rail or ship plus truck. Every intermodal move includes drayage, but a truck can do drayage work that has nothing to do with rail, such as hauling a box from a port to a warehouse across town.

03What is van intermodal?

Van intermodal is dry van freight that would normally move on a 53 ft trailer, loaded instead into a 53 ft domestic container that rides the train. Shippers use it on long lanes where rail costs less than a truck for the long haul and the transit time still works. Trucks still do the pickup and the delivery.

04Do intermodal truck drivers need a CDL?

Yes. A tractor pulling a loaded container and chassis is a Class A combination in almost every case. Port work also needs a TWIC card, and some ports need the truck on a registry. Rail ramps use their own gate systems and require the carrier to be set up for equipment interchange.

05How long are intermodal truck runs?

Most are local or regional, from a few miles to a few hundred. The long distance is the train's job. That's why many intermodal drivers are home every night and paid by the move, not by the mile.

SOURCES

SOURCE: Primary sources listed above, checked on the dates shown.

Ramp moves that fit a full week

We plan your rail and port moves with the backhaul already in mind. Each rate con lands in your inbox, and the call is yours.

ONE WEEK AT $6,000 GROSSEXAMPLE
DESKFEEYOU PAY
HAULTERMINAL5%$300
TYPICAL DESK8%$480
TYPICAL DESK10%$600

Fee on gross load revenue, only on loads you haul. 7% while your MC is under 6 months.