Skip to content
HaulTerminal

Port truck pass: getting your truck through the NY/NJ terminal gate

By , Truck dispatcher / Updated October 2026

A port truck pass is your truck's permission to enter a container terminal. At the Port of New York and New Jersey the system is literally called PortTruckPass (PTP): an online registry run by the Port Authority, tied to an RFID tag on your mirror. No tag, no entry. Here is what the registry needs, what the driver carries and why trucks get turned away.

PORTTRUCKPASS / AUGUST 2026
Trucks authorized in the Drayage Truck Registry
35,912
Trucks that served the port in August
10,053 (28%)
New authorized registrations in August
160
Gate visits in August
293,937
Share of registered trucks on diesel
99.55%
Registered trucks35,912
Source: Port Authority of NY and NJ, PortTruckPass report, August 2026.

Fewer than 3 in 10 registered trucks pulled a box at the port in August 2026. Registration is easy to keep; steady work at the gate is the hard part.

What a port truck pass is

PortTruckPass holds the Drayage Truck Registry (DTR). According to the Port Authority's truckers guidebook, revised August 2025, every Class 8 drayage truck that wants to enter a Port of NY/NJ marine terminal must be registered in the DTR and carry a valid RFID tag mounted on the truck. Three rules decide most problems:

  • No tag, no entry.
  • One tag per truck. Each VIN and plate can be tied to one tag, and each tag to one truck.
  • Engine age. New registrations need an engine that meets federal EPA on-road standards for 2014 model year heavy-duty diesel engines. Trucks with 1998 and older engines are denied entry.

Confirm current rules in the Port Authority marine tariff before you buy a truck for port work.

What the truck and driver need at the gate

The pass covers the truck. The driver and the company need their own credentials. The Port Authority's truckers page lists:

ItemWho it coversWhere it comes fromCost listed
TWIC cardDriverTSA enrollment center$124 new, $93 reduced rate, good for 5 years
SeaLink cardDriverPort Authority Truck Service Center$30 new card
Class A CDLDriverYour stateState fee
DTR registrationTruckporttruckpass.comNot listed publicly
RFID tagTruckBought in PTP under Tag ManagementShown at checkout
UIIA proofCompanyIANA's UIIA programSet by IANA and your insurer
Steamship line credit and insuranceCompanyEach ocean carrier you haul forVaries

The guidebook asks for UIIA proof at the gate, so a registered truck can still be refused a container. See how that agreement works in trailer interchange.

How to register for Port Truck Pass

  1. STEP 01

    TWIC

    Driver enrolls with TSA

  2. STEP 02

    SeaLink

    Driver card at the Truck Service Center

  3. STEP 03

    Register the truck

    Company account, VIN and plate in the DTR

  4. STEP 04

    Buy the RFID tag

    PTP Tag Management, mail or pickup

  5. STEP 05

    Mount and book

    Driver's side mirror, then a TERMPoint appointment

  1. TWIC. A federal card, so it works at every US port.
  2. SeaLink. The driver takes the TWIC to the Truck Service Center, 1160 McLester Street, Elizabeth, NJ (weekdays 6:30 a.m. to 5 p.m.).
  3. Registry. The motor carrier adds the truck by VIN and plate at porttruckpass.com. The engine has to meet the model year rule.
  4. Tag. Buy it under Tag Management by mail or pickup, and mount it on the driver's side-view mirror, never under the rear-view mirror.
  5. Appointment. Book in TERMPoint. Imports need the freight release, container and bill of lading numbers; empties and exports need the booking number, line and container type.

Why trucks get turned away at the gate

The void-out ticket gives the reason: truck not in the DTR, not approved, or a pre-1999 engine. The other common one is a double read: a spare tag loose in the cab gets read too and the truck is refused. Keep spares in a foil bag. Tailgating the truck ahead can also block the read.

A tag that used to read and stops can be tested at the Truck Service Center. The PTP help desk is 877-822-9296.

The registry by engine year

Older trucks registered under earlier rules still appear in the August 2026 report, but newer engines do most of the work.

Our math from the report: 21,018 of 35,911 trucks with an engine year listed have 2014 or newer engines, and they made 67.6% of the month's gate visits.

How a port day flows

YARDRFID GATEWAREHOUSEEMPTY RETURNCHASSIS DEPOT
EXAMPLE the pass gets you through the first gate; the rest of the loop is planning

Each box adds a delivery, an empty return and often a chassis swap, so loops per day depend on terminal turn times. Rules by port are in the US port drayage guide. Tolls add up fast on short moves; check them in the truck toll cost estimator.

Truck passes at other ports

Other ports run their own registries. At Los Angeles and Long Beach, trucks must be on the Port Drayage Truck Registry to enter a marine terminal, and cargo owners pay a Clean Truck Fund rate on loaded containers. The TWIC is the one credential every US port shares. Rail container moves are covered in intermodal trucking, and chassis sizes in types of truck trailers.

Is port work worth registering for?

The setup cost is small next to a truck payment. The real cost is time at the gate. Short repeat moves pay when someone plans the empty return and the next pickup before the first box is delivered, which is what a dispatch desk does all day.

Questions carriers ask

01How do I register my truck on Port Truck Pass?

The motor carrier sets up an account at porttruckpass.com, adds each truck by VIN and plate to the Drayage Truck Registry, and buys an RFID tag for it under Tag Management. The tag comes by mail or is picked up at the Truck Service Center in Elizabeth, NJ.

02How much does a port truck pass cost?

The Port Authority lists SeaLink driver cards at $30 for a new card, and TSA lists a new TWIC at $124 for five years. The RFID tag is bought inside PortTruckPass, and the price is shown at checkout; the Port Authority's public pages do not list it, so check it when you buy.

03Can an older truck get a port truck pass?

Not an old one. The Port Authority's August 2025 truckers guidebook says new registrations need an engine that meets federal EPA standards for 2014 model year heavy-duty diesel engines, and trucks with 1998 and older engines are denied at the gate.

SOURCES

SOURCE: Primary sources listed above, checked on the dates shown.

Registered and ready to pull boxes

Once your truck is on the registry, our desk books container moves and backhauls around the terminal hours so the gate line does not eat the week. You sign or decline every rate con.