Skip to content
HaulTerminal

Drayage rates: how a container move is priced, line by line

By , Truck dispatcher / Updated October 2026

Drayage rates are what a shipper pays, and a trucker earns, to move a container between a port terminal or rail ramp and a nearby warehouse. Unlike long-haul freight, drayage is quoted per move, with a list of charges that only show up when something happens: the container sits, the chassis is rented for extra days, the driver waits at the gate. This page lays out each line of a drayage charge, the official 2026 port fees we could confirm, and a worked example that turns a container move into dollars per mile and per hour.

Key finding: in our EXAMPLE import, the base rate is only 48% of the all-in drayage charge. Fuel, chassis, pre-pull, storage and waiting time make up the other 52%.

The lines on a drayage charge

Drayage charge components: how each is billed and who it goes to
Base (linehaul) rateFlat per move, usually round tripTruckerEvery move
Fuel surcharge% of base, often tied to a diesel indexTruckerEvery move
Chassis rentalPer day the chassis is outChassis provider (passed through)Unless the chassis is supplied
Chassis splitFlat per extra trip to fetch a chassisTruckerChassis and box at different places
Pre-pullFlat per move to the trucker's yardTruckerBox pulled before the customer is ready
Yard storagePer day in the trucker's yardTrucker or yardAfter a pre-pull or a refused delivery
Waiting timePer hour after free timeTruckerLong gate lines or slow unloads
Overweight / tri-axle chassisFlat per moveTrucker and chassis providerHeavy containers
Port and terminal feesPer container, set by the port or terminalsPort program or terminalDepends on port
Per diem and demurragePer day past free timeOcean line or terminalContainer held too long
Source: HaulTerminal summary of common drayage billing. Names and rules vary by carrier and port; the rate con and the carrier's tariff decide what applies. Click a column to sort; download as CSV.

Per diem and demurrage are not drayage charges, but they land on the same invoice conversations. Demurrage is what the terminal or line charges while a loaded container sits in the terminal. Per diem (also called detention) is what the ocean line charges when its container is out of the terminal too long. Who pays depends on who caused the delay and on the contract. A trucker who returns an empty late can be billed for it; price a late return in the container per diem calculator.

Port fees with official 2026 numbers

These are the fees we could confirm on official pages in October 2026. They are mostly paid by cargo owners, not taken from the trucker's pay, but they show up in what shippers call "drayage cost".

PORT FEES / CHECKED OCTOBER 2026
LA/LB Traffic Mitigation Fee, from Aug 1, 2026
$40.63/TEU; $81.26 other sizes
LA/LB Clean Truck Fund rate
$10/loaded TEU; $20 over 20 ft
TWIC card, new (driver, 5 years)
$124
Port of NY/NJ SeaLink card, new (driver)
$30
Sources: PierPASS/WCMTOA release, July 1, 2026; Ports of LA/LB Clean Truck Fund; TSA; Port Authority of NY and NJ. TMF exempt: empties, Alameda Corridor rail cargo, transshipments, empty chassis and bobtails.

The TMF went up 4.77% on August 1, 2026, matching the longshore wage increase, according to the PierPASS release. Port access itself, such as a truck registry and RFID tag, is a one-time setup cost for the carrier; see port truck pass.

A worked EXAMPLE: one import, every line

An import container moves from a port terminal to a warehouse 28 miles away, then the empty goes back to the terminal: 56 miles round trip. The customer was not ready on arrival day, so the container was pre-pulled to the trucker's yard and delivered the next morning.

EXAMPLE DRAYAGE INVOICE / 40 FT IMPORTEXAMPLE
Base rate, round trip
$575.00
Fuel surcharge, 22% of base
$126.50
Chassis rental, 3 days × $40
$120.00
Pre-pull to yard
$175.00
Yard storage, 1 day × $75
$75.00
Waiting time, 1.5 h × $85 past free time
$127.50
All-in charge$1,199.00
EXAMPLE only: every rate here is illustrative, not a market quote. Check each line against your own rate con.

Drayage rates per mile and per hour

  • All-in per mile: $1,199 ÷ 56 miles = $21.41 a mile.
  • Base only per mile: $575 ÷ 56 = $10.27 a mile.
  • What the truck keeps: take out the chassis rental ($120) paid to the pool, and storage if the yard is not yours. If you own the yard, the truck side is $1,079.
  • Per hour: if the import, the pre-pull and the delivery took 8 hours of the truck's time across two days, that is about $135 an hour before fuel and costs.

Those per-mile figures look huge next to van freight at a little over $2 a mile. They are not comparable. A drayage truck may run under 150 miles in a day and spend half of it in gate lines and at docks. Per hour of the truck's day is the fair test. Run your own move through the drayage rate calculator, or the per-mile side through the rate per mile calculator to set it against your other freight.

What moves drayage rates

  1. Turn time. How long a truck spends at the terminal per box. Two loops a day instead of three is a third less revenue on the same truck.
  2. Distance. Longer runs pay more per move but less per mile; very short runs get a minimum.
  3. Chassis availability. When pool chassis are scarce, carriers lose time to splits and pay more in rental days.
  4. Weight. Heavy boxes need tri-axle chassis or permits, and must still fit the 80,000 lb gross and axle limits on the Interstate.
  5. Import surges. When volumes jump, terminals back up, appointments get scarce and rates rise.
  6. Port vs rail. Rail ramp moves of domestic 53 ft containers often come with the chassis supplied; port moves usually need a TWIC and a port registry.
  7. Street turns. Reusing an import's empty for a nearby export saves an empty trip and is one of the few ways a trucker raises income per box.

How truckers protect the rate

  • Quote the round trip, not one way. The empty return is part of the job.
  • Get free time in writing. How long at the gate and at the customer before waiting time starts.
  • Record gate times. In and out times from the terminal's receipt or the ELD back up the waiting time line.
  • Know who pays chassis days before you take the box.
  • Bill accessorials the day they happen. Late accessorials get disputed.
  • Get paid fast. Drayage often has many small invoices; see how factoring rates work if cash flow is tight.

Shippers looking at the cost side can use the same table in reverse: the cheapest base rate is not the cheapest move if it comes with chassis splits and storage. How much a dispatcher costs on top of these numbers is in the dispatcher fee calculator.

Drayage rates vs intermodal and truckload rates

Drayage is the short truck leg. The full door-to-door price of an intermodal shipment adds the rail linehaul and is covered in intermodal freight rates. The terms used on drayage invoices are defined in our drayage and intermodal glossary, and the software that tracks these charges is reviewed in drayage software. For how a drayage day works from the cab, start with drayage trucking.

Methodology and updates

Port fees on this page come from official port, PierPASS, TSA and Port Authority pages, checked in October 2026. Market drayage rates are not published free by any official source we could confirm, so base rates and accessorial amounts are labeled EXAMPLE and chosen for illustration. We review this page every quarter: next update January 2027, or sooner if a listed fee changes.

Questions carriers ask

01How is a drayage charge calculated?

Most drayage quotes start with a base or linehaul rate for the move, usually a round trip from the terminal or ramp to the customer and back. A fuel surcharge is added as a percentage of the base. Then accessorials are billed as they happen: chassis days, pre-pull, yard storage, waiting time, overweight, and any port fees passed through.

02What are drayage rates per mile?

Drayage is rarely priced per mile, but you can convert it: divide the all-in charge by round-trip miles. Short moves look expensive per mile because the gate time, waiting and paperwork are the same whether the customer is 10 miles or 60 miles away. Compare per hour as well as per mile.

03Who pays the Traffic Mitigation Fee at LA and Long Beach?

The TMF is paid by the cargo side through the PierPASS system, not added to the trucker's pay. From August 1, 2026 it is $40.63 per TEU and $81.26 for other container sizes. Empty containers, bobtails and empty chassis are exempt.

04Why are drayage costs higher than they used to be?

Part of it is fees outside the truck's control: terminal fees, chassis rental and per diem when equipment is held. Part is time: congestion, appointment limits and chassis shortages mean fewer moves per truck per day, so each move has to cover more of the truck's day.

05What is a pre-pull in drayage?

A pre-pull is picking a container up from the terminal before the customer is ready for it and parking it in the trucker's yard. It saves terminal storage charges or beats a deadline, but adds a second move and yard storage, which are billed separately.

SOURCES

SOURCE: Primary sources listed above, checked on the dates shown.

Price every box like a full day

We quote container moves with the gate time, chassis days and empty return built in, and plan street turns so the truck turns more boxes. Every rate con goes to you to sign.