Skip to content
HaulTerminal

Dry van vs reefer: which trailer pays better for your truck

By , Truck dispatcher / Updated October 2026

Dry van vs reefer is the first equipment decision for most owner-operators who haul freight in a box. Both are 53 ft enclosed trailers. The reefer adds insulation and a refrigeration unit on the nose, which lets it haul food and other temperature-controlled freight. That unit is where the higher rates come from, and where the extra costs and risks come from too. This page puts the two side by side with current rates, real cost lines and the trade-offs a carrier actually feels.

Dry van vs reefer at a glance

Dry vanReefer
What it haulsPackaged, palletized dry goodsProduce, meat, dairy, frozen food, pharma, plus dry freight
Spot linehaul, Oct 10-16, 2026 (DAT)$2.26/mi$2.76/mi
All-in spot with fuel, same week$3.09/mi$3.66/mi
Load-to-truck ratio, same week9.715.8
Extra running costNoneUnit fuel, unit maintenance
TrailerCheaper, lighterPricier, heavier (unit and insulation)
Inside widthAbout 101 in (plate wall van)Less, because of insulated walls
PaperworkBill of lading, sealPlus setpoint, pre-cool, temperature records
Claims riskDamage, shortagePlus temperature claims on the whole load

Rates: DAT national spot averages for the week of October 10 to 16, 2026. All-in includes fuel.

Reefer truck vs dry van: rates

The reefer premium that week was 50 cents a mile on linehaul and 57 cents all-in. DAT's October 19 reefer report put the reefer rate 32.7% above a year earlier and well above its nine-year seasonal average of $2.14. The load-to-truck ratio, loads posted per truck posted on DAT's board, was 15.8 for reefers and 9.7 for vans: both tight markets, reefer tighter.

That premium is not free money. Part of it pays for the unit's fuel, part for the trailer, and part for the risk you take on.

Reefer trailer vs dry van: what it costs to run

EXAMPLE 1,000-MILE LOAD / REEFER VS VANEXAMPLE
Extra linehaul at Oct 2026 averages (50¢ × 1,000 mi)
+$500.00
Reefer unit fuel: 20 h × 0.7 gal/h × $6.38
−$89.32
Extra trailer and unit cost per load (your number)
your number
Unit maintenance per load
your number
Left before trailer costs$410.68
EXAMPLE: the 0.7 gal/h burn and 20 run hours are illustrative; units burn more in heat and on frozen loads. Diesel: EIA weekly average, September 28, 2026. Rate gap: DAT national averages, week of Oct 10 to 16, 2026.

The fuel line is the easy one to see. The others:

  • The trailer. A reefer trailer with a unit costs more to buy or lease than a dry van, and the unit needs its own service schedule. Spread those costs over the loads you run in a month.
  • Weight. The unit and insulation add weight, so a reefer carries less freight under the same 80,000 lb gross. On heavy loads like beverages that can cost you the load.
  • Waiting. Food warehouses often run tight appointments and charge lumper fees. Detention and lumper receipts matter more on reefer freight.
  • Insurance. Cargo policies for reefer freight cover spoilage risk and may cost more. Check that your policy covers reefer breakdown, not only accidents.

Put your own numbers into the trip fuel cost calculator, which has a reefer burn option, and log reefer fuel separately in the IFTA mileage and fuel log. Fuel used in the reefer unit is not road fuel for the truck, so ask your accountant how to report it.

Reefer vs dry van dimensions

Outside, both are the same box: 53 ft long, 102 in wide and 13 ft 6 in tall on most builds. Inside is where they differ.

Dry van (plate wall)Reefer
Outside53 ft × 102 in × 13 ft 6 in53 ft × 102-3/8 in × 13 ft 6 in
WallsThin plate, about 101 in insideInsulated: 2 in sides, 4 in front (one 2026 listing)
Roof and floorStandard3 in insulation each, ducted floor for airflow
Inside heightAbout 110 inLower, because of roof and floor insulation

Sources: Wabash DuraPlate van sheet (101 in inside width); a 2026 Utility 3000R dealer listing for the reefer wall build. Check the spec plate on the trailer you pull. Measure a load against both in the semi truck trailer dimension fit checker.

Freight and seasons

Dry van freight is the largest market: retail goods, paper, packaged food, parts. It follows retail and manufacturing cycles, with peaks before holidays.

Reefer freight follows food. Produce seasons move across the country, from the South in spring to the North and West in summer and fall. Food keeps moving in a downturn, which gives reefer carriers a steadier floor. A reefer can also run dry freight when cold loads are thin (a reefer dry van load, unit off), which a dry van cannot do in reverse.

Risk: what can go wrong

On a dry van, the usual claims are damage and shortage, and they are usually limited to the pallets involved. On a reefer, a wrong setpoint, a unit that shuts down or a broken cold chain can lead to a claim on the whole load. FDA's sanitary transportation rule (21 CFR 1.908) puts duties on carriers: sanitary equipment, pre-cooling when the shipper requires it, and temperature records on request. Read the setpoint off the bill of lading, not from memory, and download the unit's records after every load.

Dry van vs reefer vs flatbed

In any dry van vs flatbed vs reefer comparison, flatbeds are the third common choice. They pay well in building seasons, as DAT's flatbed all-in average of $3.64 a mile for the same week shows, but they bring securement and tarping work and weather exposure. That comparison is in dry van vs flatbed.

Dry van or reefer: which fits you?

Choose a dry van if you want the simplest operation, the lowest trailer cost and the widest range of posted loads, or you are starting out.

Choose a reefer if you will run food lanes, can live with appointment-heavy warehouses, and want freight that moves in every season.

Neither? With power only you can pull either type without owning one. Other comparisons that might help: dry van vs box truck and vented van vs dry van. For everything about the van itself, start with the dry van guide, and see how we run dry van dispatch.

Questions carriers ask

01Do reefer trucks make more than dry vans?

They gross more per mile on average: DAT's national reefer spot linehaul was $2.76 a mile in the week of October 10 to 16, 2026, against $2.26 for dry vans. Whether a reefer nets more depends on the extra fuel, trailer cost, waiting time at food warehouses and claims. Run both through your own cost per mile.

02Can a reefer haul dry freight?

Yes. A reefer with the unit off is an insulated dry van, and many reefer carriers take dry loads to fill a backhaul. The trade-off is a little less inside space than a van and the extra weight of the unit and insulation. A dry van cannot haul temperature-controlled freight.

03What is the difference in reefer vs dry van dimensions?

Both are usually 53 ft long, 102 in wide and 13 ft 6 in tall outside. Inside, a reefer loses space to insulation: one 2026 reefer listing shows 2 in side walls, a 4 in front wall and 3 in roof and floor insulation. A plate wall dry van gives about 101 in of inside width.

04Is a reefer harder to run than a dry van?

It asks more of the driver. You pre-cool when the shipper requires it, check the setpoint against the bill of lading, watch the unit's fuel, and keep temperature records. FDA's sanitary transportation rule puts duties on carriers for equipment and temperature records on request.

05Dry van or reefer for a new owner-operator?

A dry van is the simpler start: cheaper trailer, no unit to fuel or maintain, and the most loads posted. A reefer opens food freight that keeps moving in every season and pays more, but brings more ways to lose money on a single load. Many carriers start in a van and add reefer later.

SOURCES

SOURCE: Primary sources listed above, checked on the dates shown.

Van or reefer, we keep it loaded

We book dry van and reefer freight against your real cost per mile, chase detention at food warehouses, and plan backhauls. You sign or decline every rate con.